APPEND Applies to: SD

Positions the file pointer at the end-of-file. This deviceparameter only affects the device on the first OPEN command or OPEN command if the file is CLOSEd NODESTROY. Re-OPENing an already OPEN device with this deviceparameter has no effect. By default, OPEN sets the file pointer to the beginning-of-file.

	Note
	If an APPEND is combined with a SEEK deviceparameter the APPEND is done first - regardless of deviceparameter order.

Example:

set sd="foo.txt"
open sd:(append:recordsize=70:wrap)
use sd

This example open file foo.txt and positions the file pointer at the end of the file.

ATTACH=expr Applies to: SOC

ATTACH assigns expr as the handle name to the newly created socket. When ATTACH is used and one of LISTEN or CONNECT is specified on the same OPEN, the value of expr becomes the identifier of the newly created socket. If neither LISTEN nor CONNECT is specified, ATTACH is ignored.

For information on using the ATTACH with USE, refer to “ATTACH” in the USE Deviceparameters section.

Example:

open tcpdev:(ichset="M":connect=hostname_":"_portno_":TCP":attach="client"):timeout:"SOCKET"

This example uses the ATTACH deviceparameter to specify "client" as the identifier of the newly created socket. Note that GT.M recognizes ICHSET only in UTF-8 mode.

CHSET=expr Applies to: All devices

Establishes a common encoding for both input and output devices for the device being OPENed in UTF-8 mode. The value of the expression can be M, UTF-8, UTF-16, UTF-16LE, or UTF-16BE. For more information, refer to “ICHSET” and “OCHSET”.

COMMAND=expr Applies to: PIPE

Specifies the UNIX command the newly created shell process performs. An invalid command value triggers an error in the new process, not the process issuing the OPEN. This can make diagnosis difficult - see the “PARSE” deviceparameter for potential assistance.

CONNECT=expr Applies to: SOC

Creates a client connection with a server, which is located by the information provided by expr. A new socket is allocated for the client connection and is made the current socket for the device, if the operation is successful.

expr specifies the protocol and the protocol-specific information. Currently, GT.M supports TCP/IP and LOCAL (also known as UNIX domain) socket protocols. For TCP/IP sockets, specify expr in the form of "<host>:<port>:TCP", where host is an IPv4 or IPv6 address optionally encapsulated by square-brackets ([]) like "127.0.0.1", "::1", "[127.0.0.1]", or "[::1]" or a IPv4 or IPv6 hostname like server.fis-gtm.com. When a hostname is specified, GT.M uses the IP version of the first address returned by DNS:

For LOCAL sockets, specify expr in the form of "<pathname>:LOCAL", where <pathname> is the name of the file to be used for communication. <pathname> may contain a dollar sign ($) followed by the name of an environment variable which GT.M expands in the same way as the device name for a sequential file. The maximum allowed length of the expanded path name depends on the OS.

For LOCAL sockets, CONNECT attempts to open the specified file. If it doesn't exist or there is no listener, CONNECT retries until it succeeds or a specified timeout expires.

	Note
	CONNECT is not compatible with LISTEN.

If the OPEN does not specify a timeout, a SOCKET OPEN waits for the connection to complete or an event that terminates the attempt.

Example:

open tcpdev:(connect=hostname_":"_portno_":TCP":attach="client":ioerror="TRAP"):timeout:"SOCKET" 

This example establishes a client connect with the server using the connection string in the format of "hostname:port:TCP".

[NO]DELIMITER=expr Applies to: SOC

DELIMITER establishes or replaces the list of delimiters used by the newly created socket. The default is NODELIMITER. The delimiter list on a preexisting device remains the same until it is explicitly replaced or deleted.

expr is a string where the following characters have special interpretation:

	Note
	expr "ab:/:://:bc" is interpreted as four delimiters, which are "ab", ":", "/", and "bc". One socket can have 0-64 delimiters and each delimiter can contain 1-64 characters.

Example:

open tcpdev:(connect=host_":"_portno_":TCP":delim=$c(13):attach="client"):timeout:"SOCKET" 

This command specifies $CHAR(13) as the delimiter for the socket tcpdev.

EXCEPTION=expr Applies to: All devices

Defines an error handler for an I/O device. The expression must contain a fragment of GT.M code (for example, GOTO ERRFILE) that GT.M XECUTEs when GT.M detects an error, or an entryref to which GT.M transfers control, as appropriate for the current gtm_ztrap_form, setting except that there is never any implicit popping with EXCEPTION action.

A device EXCEPTION gets control after a non-fatal device error and $ETRAP/$ZTRAP get control after other non-fatal errors.

Example:

GTM>do ^FREAD
FREAD;
 zprint ^FREAD 
 read "File > ",sd
 set retry=0
 set $ztrap="BADAGAIN"
 open sd:(readonly:exception="do BADOPEN")
 use sd:exception="goto EOF"
 for  use sd read x use $principal write x,!
EOF;
 if '$zeof zmessage +$zstatus
 close sd
 quit
BADOPEN;
 set retry=retry+1 
 if retry=2 open sd
 if retry=4 halt
 if $piece($zstatus,",",1)=2 do  
 . write !,"The file ",sd," does not exist. Retrying in about 2 seconds ..."
 . hang 2.1
 . quit 
 if $piece($zstatus,",",1)=13 do  
 . write !,"The file ",sd," is not accessible. Retrying in about 3 seconds ..."
 . hang 3.1
 . quit
 quit
BADAGAIN;
 w !,"BADAGAIN",!
 
File >

This example asks for the name of the file and displays its contents. It OPENs that file as READONLY and specifies an EXCEPTION. The exception handler for the OPEN deals with file-not-found and file-access errors and retries the OPEN command on error. The first USE sets the EXCEPTION to handle end-of-file. The FOR loop reads the file one record at a time and transfers each record to the principal device. The GOTO in the EXCEPTION terminates the FOR loop. At label EOF, if $ZEOF is false, the code reissues the error that triggered the exception. Otherwise, the CLOSE releases the file.

[NO]EMPT[ERM] Applies to: TRM

Allows an "Erase" character on an empty input line to terminate a READ or READ # command. The default is NOEMPTERM. The gtm_principal_editing environment variable specifies the initial setting of [NO]EMPTERM. The TERMINFO specified by the current value of the TERM environment variable defines capnames values "kbs" and/or "kdch1" with character sequences for "Erase." If "kbs" or "kdch1" are multi-character values, you must also specify the ESCAPE or EDIT deviceparameters for EMPTERM recognition.

The erase character as set and shown by stty also terminates a READ command with an empty input line. You can set this erase character to various values using the stty shell command. Typical values of an erase character are <CTRL-H> and <CTRL-?>. Characters set and shown with stty setting must match what the terminal emulator sends.

The environment variable TERM must specify a terminfo entry that matches both what the terminal (or terminal emulator) sends and expects.

[NO]FFLF Applies to: SD

The [NO]FFLF deviceparameter controls whether WRITE # produces only a form-feed (<FF>) or a form-feed and line-feed (<FF><LF>). Previously, GT.M used <FF><LF> which deviated from the standard, but out of concern for existing practice the default remains <FF><LF>.

Additionally, the "gtm_nofflf" environment variable controls the default WRITE # behavior of GT.M. If it is unset or set to 0, N[O] or F[ALSE], the default behavior is unchanged. If it is set to 1, Y[ES] or T[RUE], the default behavior of WRITE # is changed to produce only a form-feed (<FF>), though M programs can still control behavior by specifying the FFLF deviceparameter.

Example:

GTM>zprint ^fflf
fflf
  set file="/tmp/myfile"
  open file:(newversion:wrap:stream:nofflf)
  use file
  write #,"Hello"
  close file
  zsystem "od -tcd1 /tmp/myfile"
  quit
GTM>do ^fflf
0000000   \f    H    e    l    l    o   \n
          12   72  101  108  108  111   10
0000007
GTM>halt

This example opens the file "myfile", and sets the NOFFLF deviceparameter with OPEN. It will write the sequence "<FF>Hello<LF>" to the file.

FIFO Applies to: FIFO

Specifies that the device for the OPEN is a FIFO name. GT.M creates the FIFO if it does not already exist and if the process has adequate privileges. However, in the event that the process does not have adequate privileges, the process generates a run-time error. A process does not require any special privileges to OPEN an existing FIFO. The FIFO needs to be readable (or writeable) just like any other file.

Example:

open file:(fifo:read:recordsize=1048576):100 

[NO]FIXED Applies to: SD FIFO PIPE

Selects a fixed-length record format for sequential disk files. FIXED does not specify the actual length of a record. Use RECORDSIZE to specify the record length.

NOFIXED specifies a variable-length record format for sequential disk files. NOFIXED is a synonym for VARIABLE. FIXED is incompatible with STREAM and VARIABLE. By default, records have VARIABLE length record format.

	Note
	FIXED length records do not implicitly use embedded record terminators such as line feeds.

In UTF-8 mode, GT.M I/O enforces a more record-oriented view of the file, treating each record as RECORDSIZE bytes long. Note that a UTF-8 code-point never splits across records. If a multi-byte character (when CHSET is UTF-8) or a surrogate pair (when CHSET is UTF-16) does not fit into the record (either logical as given by WIDTH or physical as given by RECORDSIZE), the WRITE command uses the byte values as specified by the PAD deviceparameter to fill the physical record. A combining character may end up in the subsequent record if it does not fit in the current record.

	Note
	PAD is effective only for devices opened with a CHSET related to Unicode® characters. In M mode PAD is always <SP>

Example:

GTM>do ^fixedex
fixedex;
  zprint ^fixedex
  set file="fix.txt"
  open file:(newversion:fixed:recordsize=4)
  use file
  write "Hello, World",!
  close file
  set file="fixnowrap.txt"
  open file:(newversion:fixed:recordsize=4:nowrap)
  use file
  write "Hel",!
  write "lo, World",! ; This writes only 'lo, '
  close file
  zsystem ("more fix*.txt")
  zsystem ("od -cb fix.txt")
  zsystem ("od -cb fixnowrap.txt")
  quit
::::::::::::::
fix.txt
::::::::::::::
Hello, World
::::::::::::::
fixnowrap.txt
::::::::::::::
Hel lo,
0000000   H   e   l   l   o   ,       W   o   r   l   d
        110 145 154 154 157 054 040 127 157 162 154 144
0000014
0000000   H   e   l       l   o   ,
        110 145 154 040 154 157 054 040
0000010

Example:

GTM>zprint ^gtmcp
gtmcp ; Copy a binary file using GT.M
  new dest,line,max,src
  if 2>$length($zcmdline," ") write "$gtm_dist/mumps -r source target",!
  set dest=$piece($zcmdline," ",2)
  set src=$piece($zcmdline," ",1)
  set max=1024*1024 ; the maximum GT.M string size
  open src:(readonly:FIXED:WRAP:CHSET="M") ;
  open dest:(newversion:FIXED:WRAP:CHSET="M") ; use FIXED format because it does not insert carriage control characters after $X reaches its maximum value.
  for  use src read line#max quit:$zeof  use dest write line
  close src
  use dest
  set $x=0
  close dest
  quit

This example copies a binary file using GT.M.

[NO]FOLLOW Applies to: SD

Configures READ to return only when it has a complete record or reaches any specified timeout; it waits for more input rather than terminating on an EOF (end-of-file) condition.

The USE command can switch a device from NOFOLLOW to FOLLOW or from FOLLOW to NOFOLLOW. This provides a READ mode of operation similar to a tail -f in UNIX.

GROUP=expr Applies to: SOC(LOCAL) SD FIFO

Specifies access permission on a UNIX file for other users in the file owner's group. The expression is a character string evaluating to null or to any combination of the letters RWX, indicating respectively Read, Write, and eXecute access. When permission controlling deviceparameters (OWNER,GROUP,WORLD) appears on an OPEN of a new file, any user category (OWNER, SYSTEM, WORLD), that is not explicitly specified is given the default access permissions. When any one of these deviceparameters appears on an OPEN of an existing device, any user category that is not explicitly specified remains unchanged.

In order to modify file security, the user who issues the OPEN must have ownership.

If none of GROUP, SYSTEM, OWNER, or WORLD are specified on OPEN, GT.M does not modify the permissions on an existing file and new files are created using the standard UNIX rules.

Example:

open "test52.txt":(append:group="rw") 

This examples open file test52.txt in append mode with Read Write group access. Note that the user who opens file text52.txt must have ownership permissions for it.

ICHSET=expr

Applies to: All devices

Establishes the character encoding of an input device being OPENed and USEed in the UTF-8 mode. The value of the expression can be M, UTF-8, UTF-16, UTF-16LE, or UTF-16BE. In M mode, ICHSET has no effect.

If ICHSET is not specified, GT.M assumes UTF-8 as the default character set for input from the device.

If expr is set to a value other than M, UTF-8, UTF-16, UTF-16LE or UTF-16BE, GT.M produces a run-time error. UTF-16, UTF-LE, and UTF-16BE are not supported for $Principal and Terminal devices.

	Note
	ICHSET is a deviceparameter of both the OPEN and USE commands. As ICHSET can change the character set of an already OPENed device, it can help deal with binary data intermixed with character data.

INDEPENDENT Applies to: PIPE

The INDEPENDENT deviceparameter specifies that the newly created process will not be terminated by the CLOSE of the device. The input and output of INDEPENDENT processes should be handled in such a way that it runs independently even after the CLOSE of the device. By default, CLOSE terminates the process associated with the PIPE device.

Applies to: SD, PIPE, and FIFO

IKEY allows the use of a seperate key for READ to a device; for example, when a GT.M process is an element of a UNIX pipe. The format of the IKEY deviceparameter is:

IKEY="key_name [IV]"

key_name is case-sensitive and must match a key name in the "files" section of the gtmcrypt_config file. The optional IV specifies an initialization vector to use for encryption and decryption.

For more information, refer to the description of KEY deviceparameter of OPEN or USE.

IOERROR=expr Applies to: SOC

Enables exception handling in socket devices. expr specifies the I/O error trapping mode. A value equal to "TRAP" specifies that I/O errors on a device raise error conditions. A value equal to "NOTRAP", or when IOERROR is not specified, indicates that I/O error on a device does not raise error conditions.

	Note
	The IOERROR setting is associated with sockets while EXCEPTION is associated with the SOCKET device. In other words, IOERROR can be turned on or off for each of the sockets associated with a SOCKET device but there is only one EXCEPTION value which is used for all the sockets.

Example:

open sock:(connect=host_":"_port_":TCP":delim=$char(13,10):ioerror="TRAP")::"SOCKET" 

This example opens a socket connection and specifies that I/O errors on the device raises error conditions.

If $LENGTH(expr)&("Tt"[$EXTRACT(expr)) then Error Trapping is enabled; otherwise the application must check $DEVICE and other ISVs for errors.

Note that an OPEN command does not change the current device. Therefore, $DEVICE does not have the status information when an error occurs on OPEN. An application should check $TEST and other ISVs for errors on OPEN.

$DEVICE holds status information only after a socket is successfully ATTACHed to a socket device. To properly trap IOERRORs related to connection handling, it is best to create an empty SOCKET device (with something like open tcpdev::timeout:"SOCKET") before opening a socket connection with the OPEN (with LISTEN or CONNECT deviceparameters) command. Then, use ATTACH to bring it to the current SOCKET device. This method ensures that a device exists that would update $DEVICE with status information.

Applies to: SD, PIPE, and FIFO

Specifies information about the key file to use for reading and writing encrypted data. The syntax of the KEY deviceparameter is as follows:

KEY="key_name [IV]"

key_name is case-sensitive and must match a key name in the "files" section of the gtmcrypt_config file. The optional IV specifies an initialization vector to use for encryption and decryption.

To perform encryption and description, GT.M calls an encryption plugin using the GT.M encryption API and can use any library that conforms to the API. The encryption plugin in turn can call user-selected cryptographic libraries for cryptographic functionality. The key name and IV are passed as binary sequences of bytes to the reference implementation plugin. Because GT.M only uses the first space in the deviceparameter to delimit the end of the key, the IV can include any content, including spaces. The GT.M runtime system uses the plugin to pass the IV to the cryptographic libraries used, which use the length of the IV, to determine whether an IV less than the required size it is zero padded, and whether an IV that is longer than the required length generates an error. FIS suggests using $ZCHAR() in preference to $CHAR() when building IV byte sequences, and to make sure that IV sequences are not unintentionally subjected to numeric conversion.

A USE command with a KEY/IKEY/OKEY deviceparameter that attempts to change the cipher key or IV, including disabling encryption (by specifying an empty key), only succeeds prior to the first WRITE or READ, or after the encryption or decryption state has been reset, such as after a REWIND (only for READ) or a TRUNCATE at the start of a file (for both READ and WRITE).

Separate IKEY and OKEY deviceparameters allow different keys for READ from and WRITE to a device; for example, when a GT.M process is an element of a UNIX pipe. Because encryption ciphers use state machines (which are initialized with the IV at the beginning of the file), GT.M permits READ and WRITE operations only either starting at the beginning of a file, or at the position at which the last READ or WRITE operation completed. In particular, non-empty files cannot be opened in APPEND mode; the SEEK deviceparameter is prohibited; and the TRUNCATE is only permitted at the beginning of a file or at the end, the former deleting the contents, and the latter effectively a no-op.

	Note
	Encrypted files must be written and read sequentially from the beginning (including the Byte Order Marker for UTF files); GT.M supports READ and WRITE operations at arbitrary locations in a file only for unencrypted files.

Example:

The basic steps to use a key and IV to create an encrypted file and decrypt its data in a testing environment are as follows. These steps are solely for demonstration purposes. You must understand and appropriately adjust the steps before using them in a production environment. For example, in a production environment you should keep the key files in a secure location, protected with appropriate permissions from unauthorized access (such as 0500 for directories and 0400 for individual files). File encryption is just one of many components of a comprehensive security plan.

export LD_LIBRARY_PATH=/usr/local/lib
export GNUPGHOME=$PWD/mygnupg
$gtm_dist/plugin/gtmcrypt/gen_keypair.sh mykeypair@gtm Keymaster
$gtm_dist/plugin/gtmcrypt/gen_sym_key.sh 0 Sunday.key
$gtm_dist/plugin/gtmcrypt/gen_sym_key.sh 0 Monday.key
$gtm_dist/plugin/gtmcrypt/gen_sym_key.sh 0 Tuesday.key
$gtm_dist/plugin/gtmcrypt/gen_sym_key.sh 0 Wednesday.key
$gtm_dist/plugin/gtmcrypt/gen_sym_key.sh 0 Thursday.key
$gtm_dist/plugin/gtmcrypt/gen_sym_key.sh 0 Friday.key
$gtm_dist/plugin/gtmcrypt/gen_sym_key.sh 0 Saturday.key
echo -n "Enter password for gtm_passwd";export gtm_passwd="`$gtm_dist/plugin/gtmcrypt/maskpass|cut -f 3 -d " "`"
export gtmcrypt_config=mygtmcryptfile
cat mygtmcryptfile
 files: {
 CustomerReportKey1: "Sunday.key";
 CustomerReportKey2: "Monday.key";
 CustomerReportKey3: "Tuesday.key";
 CustomerReportKey4: "Wednesday.key";
 CustomerReportKey5: "Thursday.key";
 CustomerReportKey6: "Friday.key";
 CustomerReportKey7: "Saturday.key";
};
$gtm_dist/mumps -dir
GTM>zprint ^encrfile
encrfile
 set now=$horolog
 set timestamp=$zdate(now,"YYYYMMDDAM1260SS")
 set dayofweek=$zdate(now,"DAY","","1,2,3,4,5,6,7")
 set file="Customers"_timestamp_".log"
 open file:(newversion:key="CustomerReportKey"_dayofweek_" "_timestamp)
 use file
 write "Customer Report - Page 1",!
 close file
 write "IV : ",timestamp,!,"Key : CustomerReportKey"_dayofweek
GTM>do ^encrfile
IV : 20140911AM042419
Key : CustomerReportKey5
GTM>zprint ^readencrfile
readencrfile(key,iv)
 set file="Customers"_iv_".log"
 open file:(key=key_" "_iv)
 use file
 for read data use $principal write data,! use file quit:$zeof
 close file
GTM>do ^readencrfile("CustomerReportKey5","20140911AM042419")
Customer Report - Page 1
GTM>

In this example, the key name is CustomerReportKey followed by the number representing the day of the week, and IV is a timestamp, which is also a part of the file name. Although all reports start with the same string "Customer Report - Page 1", using a different IV for each file ensures that encrypted data begins with a different sequence of bytes, and making that IV a part of the file name ensures that the recipient of a report (who would have access to the key) can easily deduce the IV needed to decrypt the contents.

LISTEN=expr Applies to: SOC

A new socket is allocated to listen for a connection. It is made the current socket for the device, if the operation is successful. Upon successful completion, $KEY is set to the format of "LISTENING|<socket_handle>|{<portnumber>|</path/to/LOCAL_socket>}" otherwise, $KEY is assigned the empty string.

expr specifies the protocol and protocol specific information. Currently, GT.M supports TCP/IP and LOCAL (also known as UNIX domain) socket protocols. For TCP/IP sockets, specify expr in the form of "<port>:TCP".

If <port>=0 is specified, the system chooses the port for the TCP/IP socket.

For LOCAL sockets:

MOREREADTIME=intexpr Applies to: SOC

MOREREADTIME specifies the polling interval (in milliseconds) that a SOCKET device uses to check for arriving packets.

With no MOREREADTIME specified, SOCKET READ implements a dynamic approach of using a longer first interval of 200 ms when it finds no data, then shortening the interval to 10 ms when data starts to arrive.

If an interval is specified, the SOCKET device always uses the specified interval and doesn't adjust dynamically. This applies to any SOCKET READ. For more information on implementing SOCKET READ, refer to “Socket Read Operation”.

If a SOCKET READ is not subject to any of the defined terminating conditions, it terminates either after it has at least one character followed by an interval with no new packets, or reading 1,048,576 bytes.

If you use the MOREREADTIME behavior, bear in mind that:

Example:

Use tcpdev:morereadtime=200 

This example specifies that all READs for socket device tcpdev must wait for 200 milliseconds for input.

NEWVERSION Applies to: SD FIFO SOC(LOCAL)

The NEWVERSION deviceparameter assures that when an existing file is used, it is empty upon the OPEN.

By default, if any version of the file exists, OPEN accesses the current version. If no version of the file exists, OPEN without READONLY creates a new file.

Example:

GTM>file1="foo.txt"
GTM>open file1:newversion:recordsize=5000 
GTM>

This example creates a new version of sequential file foo.txtwith RECORDSIZE of 5000 bytes.

Example:

GTM>set delim=$c(13)
GTM>set tcpdev="server$"_$j,timeout=30
GTM>open tcpdev:(LISTEN="local.socket"_":LOCAL":delim=$c(13):attach="server":newversion):timeout:"SOCKET"

This example deletes the old local.socket file (if it exists) and creates a new LISTENING local.socket file.

OCHSET=expr Applies to: All devices

Establishes the character encoding of the output device OPENed and USEed in the UTF-8 mode. The value of the expression can be M, UTF-8, UTF-16, UTF-16LE, or UTF-16BE. In M mode, OCHSET has no effect.

If *CHSET is not specified, GT.M assumes UTF-8 as the default character set for all the input / output devices.

If expr is set to a value other than M, UTF-8, UTF-16, UTF-16LE or UTF-16BE, GT.M produces a run-time error. UTF-16, UTF-LE, and UTF-16BE are not supported for $Principal and Terminal devices.

	Note
	OCHSET is a deviceparameter of both the OPEN and USE commands. As OCHSET can change the character set of an already OPENed device, it can help deal with binary data intermixed with character data.

Example:

GTM>SET file1="mydata.out" 
GTM>SET expr="UTF-16LE" 
GTM>OPEN file1:(ochset=expr) 
GTM>SET DS=$CHAR($$FUNC^%HD("0905"))_$CHAR($$FUNC^%HD("091A"))
GTM>SET DS=DS_$CHAR($$FUNC^%HD("094D"))_$CHAR($$FUNC^%HD("091B"))_$CHAR($$FUNC^%HD("0940"))
GTM>USE file1 WRITE DS,! 
GTM>CLOSE file1 

This example opens a new file called mydata.out and writes Devanagari characters in the UTF-16LE encoding.

Applies to: SD, PIPE, and FIFO

OKEY allows the use of a seperate key for WRITE to a device; for example, when a GT.M process is an element of a UNIX pipe. The format of the IKEY deviceparameter is:

OKEY="key_name [IV]"

key_name is case-sensitive and must match a key name in the "files" section of the gtmcrypt_config file. The optional IV specifies an initialization vector to use for encryption and decryption.

For more information, refer to the description of KEY deviceparameter of OPEN or USE.

OWNER=expr Applies to: SOC(LOCAL) SD FIFO

Specifies access permission on a UNIX file for the owner of the file. The expression is a character string evaluating to null or to any combination of the letters RWX, indicating Read, Write, and eXecute access. When any one of these deviceparameters appears on an OPEN of a new file, any user category that is not explicitly specified is given the default mask. When any one of these deviceparameters (OWNER, GROUP, , WORLD) appears on an OPEN of an existing file, any user category that is not explicitly specified remains unchanged.

To modify file security, the user who issues the OPEN must have ownership.

If none of GROUP, SYSTEM, OWNER, or WORLD are specified on OPEN, GT.M does not modify the permissions on an existing file and new files are created using the standard UNIX rules.

Example:

open "test49.txt":(newversion:owner="rw":group="rw":world="rw")

This example opens a new version of test49.txt with Read Write acess for the owner.

PAD=expr Applies to: SD FIFO PIPE

For FIXED format sequential files when the character set is not M, if a multi-byte character (when CHSET is UTF-8) or a surrogate pair (when CHSET is UTF-16) does not fit into the record (either logical as given by WIDTH or physical as given by RECORDSIZE) the WRITE command uses bytes with the value specified by the PAD deviceparameter to fill out the physical record. READ ignores the pad bytes when found at the end of the record. The value for PAD is given as an integer in the range 0-127 (the ASCII characters). PAD is always a byte value and the default is $ZCHAR(32) or [SPACE].

In UTF-8 mode, there are three cases that cause GT.M to insert PAD characters when WRITEing. When READing GT.M attempts to strip any PAD characters. This stripping only works properly if the RECORDSIZE and PAD are the same for the READ as when the WRITEs occurred. WRITE inserts PAD characters when:

	Note
	In all UTF-16 character sets, RECORDSIZE must be even and PAD bytes occupy two bytes with the high order byte zero.

Example:

GTM>do ^padexample
padexample 
 zprint ^padexample
 set a="主要雨在西班牙停留在平原"
 set encoding="UTF-8"
 set filename="bom"_encoding_".txt"
 open filename:(newversion:fixed:record=8:pad=66:chset=encoding)
 use filename
 write a
 close filename
 halt
$ cat bomUTF-8.txt 
主要BB雨在BB西班BB牙停BB留在BB平原
$ od -tcd1 bomUTF-8.txt 
0000000  344  270  273  350  246  201    B    B  351  233  250  345  234  250    B    B
         -28  -72  -69  -24  -90 -127   66   66  -23 -101  -88  -27 -100  -88   66   66
0000020  350  245  277  347  217  255    B    B  347  211  231  345  201  234    B    B
         -24  -91  -65  -25 -113  -83   66   66  -25 -119 -103  -27 -127 -100   66   66
0000040  347  225  231  345  234  250    B    B  345  271  263  345  216  237
         -25 -107 -103  -27 -100  -88   66   66  -27  -71  -77  -27 -114  -97   32   32

In this example, the local variable a is set to a string of three-byte characters. PAD=66 sets padding byte value to $CHAR(66)

PARSE Applies to: PIPE

The PARSE deviceparameter invokes preliminary validation of the COMMAND value. When debugging, PARSE provides more accessible diagnosis for COMMAND values. By default, OPEN does not validate command values before passing them to the newly created process. PARSE has certain limitations, which may, or may not map to, those of the shell.

[NO]READONLY Applies to: SD FIFO PIPE

OPENs a device for reading only (READONLY) or reading and writing (NOREADONLY).

To open a sequential file using the READONLY parameter, the file must exist on the disk. If it does not, GT.M issues a run-time error.

When GT.M encounters a WRITE directed to a file, OPENed READONLY, GT.M issues a run-time error.

By default, OPEN accesses the device or file NOREADONLY (read-write).

Example:

GTM>set filename="foo.txt"
GTM>open filename:(readonly:recordsize=1048576) 
GTM>

This example open the file foo.txt with read permission

RECORDSIZE=intexpr Applies to: SD FIFO PIPE

Overrides the default record size for a disk.

RECORDSIZE specifies an initial WIDTH. Note because RECORDSIZE is in bytes that in UTF-8 mode it produces a WIDTH that assumes one-byte characters.

The RECORDSIZE of a fixed length record for a GT.M sequential disk device is always specified in bytes, rather than characters.

For all UTF-16 CHSET values, RECORDSIZE must be even and PAD characters each occupy two bytes in the record.

The maximum size of intexpr is 1,048,576 bytes. GT.M produces an error if you specify a value greater than 1,048,576.

When a CHSET related to Unicode® characters is in use, GT.M treats RECORDSIZE as a byte limit at which to wrap or truncate output depending on [Z][NO]WRAP. For any Unicode character set, GT.M ignores RECORDSIZE for a device which is already open if any I/O has been done.

If the character set is not UTF-16, UTF-16LE, UTF-16BE, the default RECORDSIZE is 32K-1bytes.

If the character set is UTF-16, UTF-16LE or UTF16-BE, the RECORDSIZE must always be in multiples of 2. For these character sets, the default RECORDIZE is 32K-4 bytes.

For all UTF-16 CHSET values, RECORDSIZE must be even and PAD characters each occupy two bytes in the record.

REWIND Applies to: SD

REWIND positions the file pointer of a sequential disk.

When $PRINCIPAL identifies a device that supports REWIND, the REWIND or INREWIND device parameters perform a REWIND of the input and OUTREWIND performs a REWIND of the output.

By default, OPEN does not REWIND.

Example:

OPEN "test40.txt":(REWIND:RECORDSIZE=70:NOWRAP) 

This example opens file test40.txt and places the file pointer at the beginning of the file.

SEEK Applies to: SD

Positions the current file pointer to the location specified in strexpr. The format of strexpr is a string of the form "[+|-]integer" where unsigned value specifies an offset from the beginning of the file, and an explicitly signed value specifies an offset relative to the current file position. For STREAM or VARIABLE format, the positive intexpr after any sign is a byte offset, while for a FIXED format, it is a record offset. In order to deal with the possible presence of a Byte Order Marker (BOM), SEEK for a FIXED format file written in a UTF character set must follow at least one prior READ since the device was created.

	Note
	If an APPEND is combined with a SEEK deviceparameter the APPEND is done first - regardless of deviceparameter order.

Example:

GTM>zprint ^seekdemo
seekdemo
  new x,p
  set p="seekfixed"
  open p:(newversion:fixed:recordsize=60)
  use p
  ; create file with 9 records of length 60 bytes each
  ; number from 0 to correspond to record offset
 
  for i=0:1:8 write $justify(i_" - [-05-|-10-|-15-|-20-|-25-|-30-|-35-|-40-|-45-|-50-|-55-|",60)
  use p:rewind
  for i=0:1:8 read x set zk=$zkey use $p write "x= ",x," $zkey= ",zk,! use p
  close p
  write !!,"** OPEN with FIXED:RECORDSIZE=60:seek=""5""",!
  open p:(fixed:recordsize=60:seek="5")
  use p
  read x set ZKEY=$zkey
  ;expect: $ZKEY= 6,0
  use $p write "x= ",x," $zkey= ",ZKEY,!
  write !,"** use with SEEK=""-3""",!
  use p:seek="-3"
  read x set ZKEY=$zkey
  ;expect: $ZKEY= 4,0
  use $p write "x= ",x," $zkey= ",ZKEY,!
  write !,"** use with SEEK=""-1"" to read from the same record. read x#20 to read a partial record",!
  use p:seek="-1"
  read x#20 set ZKEY=$zkey
  ;expect: $ZKEY= 3,20
  use $p write "x= ",x," $zkey= ",ZKEY,!
  write !,"** read x#40 to finish reading the record",!
  use p
  read x#40 set ZKEY=$zkey
  ;expect: $ZKEY= 4,0
  use $p write "x= ",x," $zkey= ",ZKEY,!
  write !,"** CLOSE NODESTROY and reOPEN with no deviceparameters",!
  close p:nodestroy
  open p
  use p
  read x set ZKEY=$zkey
  ;expect: $ZKEY= 5,0
  use $p write "x= ",x," $zkey= ",ZKEY,!
  write !,"** CLOSE NODESTROY and reOPEN with SEEK=""+2""",!
  close p:nodestroy
  open p:seek="+2"
  use p
  read x set ZKEY=$zkey
  ;expect: $ZKEY= 8,0
  use $p write "x= ",x," $zkey= ",ZKEY,!
  write !,"** CLOSE NODESTROY and reOPEN with M:SEEK=""+3""",!
  close p:nodestroy
  open p:(M:seek="+3")
  use p
  read x set ZKEY=$zkey
  ;expect: $ZKEY= 4,0
  use $p write "x= ",x," $zkey= ",ZKEY,!
  write !,"** CLOSE NODESTROY and reOPEN with APPEND:SEEK=""-1""",!
  close p:nodestroy
  open p:(append:seek="-1")
  use p
  read x set ZKEY=$zkey
  ;expect: $ZKEY= 9,0
  use $p write "x= ",x," $zkey= ",ZKEY,!
  close p
  write !,"** CLOSE DESTROY and OPEN non-fixed with SEEK=""120"" and read 60 bytes",!
  open p:seek="120"
  use p
  read x#60 set ZKEY=$zkey
  ;expect: $ZKEY= 180
  use $p write "x= ",x," $zkey= ",ZKEY,!
  write !,"** CLOSE NODESTROY and reOPEN with append:SEEK=""-60"" and read last 60 bytes",!
  close p:nodestroy
  open p:(append:seek="-60")
  use p
  read x#60 set ZKEY=$zkey
  ;expect: $ZKEY= 540
  use $p write "x= ",x," $zkey= ",ZKEY,!
  close p
  quit
 
 
 
GTM>do ^seekdemo
x= 0 - [-05-|-10-|-15-|-20-|-25-|-30-|-35-|-40-|-45-|-50-|-55-| $zkey= 1,0
x= 1 - [-05-|-10-|-15-|-20-|-25-|-30-|-35-|-40-|-45-|-50-|-55-| $zkey= 2,0
x= 2 - [-05-|-10-|-15-|-20-|-25-|-30-|-35-|-40-|-45-|-50-|-55-| $zkey= 3,0
x= 3 - [-05-|-10-|-15-|-20-|-25-|-30-|-35-|-40-|-45-|-50-|-55-| $zkey= 4,0
x= 4 - [-05-|-10-|-15-|-20-|-25-|-30-|-35-|-40-|-45-|-50-|-55-| $zkey= 5,0
x= 5 - [-05-|-10-|-15-|-20-|-25-|-30-|-35-|-40-|-45-|-50-|-55-| $zkey= 6,0
x= 6 - [-05-|-10-|-15-|-20-|-25-|-30-|-35-|-40-|-45-|-50-|-55-| $zkey= 7,0
x= 7 - [-05-|-10-|-15-|-20-|-25-|-30-|-35-|-40-|-45-|-50-|-55-| $zkey= 8,0
x= 8 - [-05-|-10-|-15-|-20-|-25-|-30-|-35-|-40-|-45-|-50-|-55-| $zkey= 9,0
** OPEN with FIXED:RECORDSIZE=60:seek="5"
x= 5 - [-05-|-10-|-15-|-20-|-25-|-30-|-35-|-40-|-45-|-50-|-55-| $zkey= 6,0
** use with SEEK="-3"
x= 3 - [-05-|-10-|-15-|-20-|-25-|-30-|-35-|-40-|-45-|-50-|-55-| $zkey= 4,0
** use with SEEK="-1" to read from the same record. read x#20 to read a partial record
x= 3 - [-05-|-10-|-15-| $zkey= 3,20
** read x#40 to finish reading the record
x= -20-|-25-|-30-|-35-|-40-|-45-|-50-|-55-| $zkey= 4,0
** CLOSE NODESTROY and reOPEN with no deviceparameters
x= 4 - [-05-|-10-|-15-|-20-|-25-|-30-|-35-|-40-|-45-|-50-|-55-| $zkey= 5,0
** CLOSE NODESTROY and reOPEN with SEEK="+2"
x= 7 - [-05-|-10-|-15-|-20-|-25-|-30-|-35-|-40-|-45-|-50-|-55-| $zkey= 8,0
** CLOSE NODESTROY and reOPEN with M:SEEK="+3"
x= 3 - [-05-|-10-|-15-|-20-|-25-|-30-|-35-|-40-|-45-|-50-|-55-| $zkey= 4,0
** CLOSE NODESTROY and reOPEN with APPEND:SEEK="-1"
x= 8 - [-05-|-10-|-15-|-20-|-25-|-30-|-35-|-40-|-45-|-50-|-55-| $zkey= 9,0
** CLOSE DESTROY and OPEN non-fixed with SEEK="120" and read 60 bytes
x= 2 - [-05-|-10-|-15-|-20-|-25-|-30-|-35-|-40-|-45-|-50-|-55-| $zkey= 180
** CLOSE NODESTROY and reOPEN with append:SEEK="-60" and read last 60 bytes
x= 8 - [-05-|-10-|-15-|-20-|-25-|-30-|-35-|-40-|-45-|-50-|-55-| $zkey= 540
 
GTM>

This program demonstrates the use of the SEEK deviceparameter on OPEN and USE and reOPEN after CLOSE NODESTROY. This test is shown as an M program which may be executed, followed by the expected test output. First the test creates the file called "seekfixed" with 9, 60-byte records and then REWINDs and reads each record and outputs the record followed by $ZKEY which is a record,byte pair. Note that the records are numbered from 0 to match the SEEK record offset. Later in the test the same file is OPENed VARIABLE so $ZKEY will be a byte offset in that case. Details are given after the file output.

The first OPEN has deviceparameters set to (FIXED:RECORDSIZE=60:SEEK="5") which SEEKs to record offset 5 or physical record 6. Note, FIXED length records and RECORDSIZE remain in effect after a CLOSE NODESTROY unless changed on a reOPEN. Record offset 5 is read and output along with $ZKEY= 6,0 which points to the beginning of record offset 6. Next, a USE with SEEK="-3" is done to move back 3 records to read and output record followed by $ZKEY= 4,0. A USE with SEEK="-1" moves back one record to the beginning of the record just processed. A partial read of 20 bytes is done to show a record offset 3 with a byte offset of 20 or $ZKEY= 3,20. A read of 40 bytes is then done to finish processing that record for a $ZKEY= 4,0. Next a sequence of CLOSE NODESTROY and reOPENs are done. After the first CLOSE NODESTROY a reOPEN is done with no deviceparameters. The state of the file device, including file position, is restored and a read is done of record offset 4 which is output followed by $ZKEY= 5,0. The file device is then CLOSEd NODESTROY and a reOPEN is done with the only deviceparameter being SEEK="+2". The state of the file device is restored and a relative SEEK is done 2 records later in the file with a read which outputs record offset 7 followed by $ZKEY= 8,0. The file device is then CLOSEd NODESTORY and a reOPEN is done with deviceparameters (M:SEEK="+3"). The file device is OPENed at the beginning of the file due to the presence of a deviceparameter (M) other than SEEK on reOPEN. A relative SEEK forward of 3 records is then done from the beginning of the file and record offset 3 is read and output followed by $ZKEY= 4,0. The file device is then CLOSEd NODESTORY and a reOPEN is done with the (APPEND:SEEK="-1"). APPEND moves the file position to the EOF and then the SEEK="-1" moves the file position to the beginning of record 8 - the final record in the file. Note, the APPEND is applied prior to the SEEK - regardless of deviceparameter order. The file device is then CLOSEd (DESTROY is the default) and OPENed with the only deviceparameter being absolute SEEK="120" to byte offset 120. This processing is NOFIXED by default and a read of x#60 is done and output followed by $ZKEY= 180. The output is the same as record 2 in FIXED format. Finally, the file device is then CLOSEd NODESTROY and a reOPEN is done with deviceparameters (APPEND:SEEK="-60"). This will move the file position to the EOF and go back 60 bytes which is the starting offset to the final record in the file. Another read of x#60 and is done and output followed by $ZKEY= 540 - which is the size of the file.

SHELL Applies to: PIPE

The SHELL deviceparameter specifies the shell for the new process. By default the newly created process uses the shell specified by the $SHELL environment variable, otherwise, if the environment variable SHELL is undefined the process uses /bin/sh.

STDERR Applies to: PIPE

The STDERR deviceparameter specifies that the stderr output from the created process goes to a PIPE device with the name of the STDERR value. This PIPE device acts as a restricted device that can appear only as the argument to USE, READ and CLOSE commands. It is implicitly READONLY and an attempt to WRITE to it triggers an error. If it has not previously acted as the argument to an explicit CLOSE command, the CLOSE of the PIPE device implicitly closes the the STDERR device.

If the OPEN command does not specify STDERR, GT.M redirects the stderr output of the co-process created by the COMMAND to the standard output of the co-process. Specify STDERR when there is a need to read the standard error of the COMMAND seperately.

[NO]STREAM Applies to: SD FIFO PIPE

STREAM and VARIABLE are semantically equivalent unless WRAP is disabled. As long as records do not exceed the WIDTH, they are also equivalent.

When WRAP is disabled and a WRITE exceeds the WIDTH, VARIABLE format truncates the line at the WIDTH, however in STREAM format, each WRITE argument is output without truncation or line terminator and the total record can be of arbitrary length.

For STREAM or VARIABLE record format files, a READ returns when it encounters an EOL, or has read #length characters for a READ #(fixed length READ), or WIDTH characters if #length is not specified, whichever occurs first.

By default, records are VARIABLE, NOSTREAM.

Example:

set sd="foo.txt"
open sd:(newversion:stream)
use sd:(width=20:nowrap)
for i=1:1:10 write " the quick brown fox jumped over the lazy dog ",$x,!
use sd:(rewind:width=100)
for i=1:1 use sd read x quit:$zeof use $principal write !,i,?5,x
close sd
quit 

The output of this example is as follows:

1     the quick brown fox jumped over the lazy dog 46
2     the quick brown fox jumped over the lazy dog 46
3     the quick brown fox jumped over the lazy dog 46
4     the quick brown fox jumped over the lazy dog 46
5     the quick brown fox jumped over the lazy dog 46
6     the quick brown fox jumped over the lazy dog 46
7     the quick brown fox jumped over the lazy dog 46
8     the quick brown fox jumped over the lazy dog 46
9     the quick brown fox jumped over the lazy dog 46
10    the quick brown fox jumped over the lazy dog 46

If you change the FORMAT to VARIABLE, the same example produces the following output.

1     the quick brown fox 
2     the quick brown fox 
3     the quick brown fox 
4     the quick brown fox 
5     the quick brown fox 
6     the quick brown fox 
7     the quick brown fox 
8     the quick brown fox 
9     the quick brown fox 
10    the quick brown fox 

If you remove the "!" format from the WRITE sequence for VARIABLE, the same example produces the following output:

1     the quick brown fox 

With STREAM, the same example produces the following output:

1     the quick brown fox jumped over the lazy dog 46 the quick brown fox jumped over the lazy dog 94 the
2     quick brown fox jumped over the lazy dog 142 the quick brown fox jumped over the lazy dog 191 the q
3    uick brown fox jumped over the lazy dog 240 the quick brown fox jumped over the lazy dog 289 the qui
4    ck brown fox jumped over the lazy dog 338 the quick brown fox jumped over the lazy dog 387 the quick
5     brown fox jumped over the lazy dog 436 the quick brown fox jumped over the lazy dog 485

SYSTEM=expr Applies to: SOC(LOCAL) SD FIFO

This deviceparameter is a synonym for OWNER that is provided in the UNIX version of GT.M for compatibility with OpenVMS applications.

Example:

GTM> set perm="rwx" 
GTM>OPEN "test52.txt":(NEWVERSION:SYSTEM="r":GROUP=perm:WORLD=perm) 
GTM>ZSYSTEM "ls -la test52.txt" 

-r--rwxrwx 1 user group 0 Aug 20 18:36 test52.txt
GTM> 

This example opens file test52.txt and sets read access for the owner, while others have complete access.

[NO]TRUNCATE Applies to: SD

Truncates the file destroying all data beyond the current file pointer. If APPEND is also specified, the file pointer will be positioned at the end of the file even if TRUNCATE is before APPEND in the list of device parameters.

TRUNCATE on a USE $PRINCIPAL command works on a stdout device when the device supports the action.

UIC=expr Applies to: SOC(LOCAL) SD FIFO

Specifies the owner and group for the file.

Specifies the group that has access to the file. The format of the string is "o,g" where g is a decimal number representing the group portion of the UIC and o is a decimal number representing the owner portion. The super-user can set the file UIC to any value. See the man page for the chown() system call for the rules for regular users since they vary by platform and system configuration.

VARIABLE Applies to: SD FIFO PIPE

Specifies the VARIABLE record length format for sequential disk files.

By default, records have variable length format.

For more information, refer to “STREAM”.

WORLD=expr Applies to: SOC(LOCAL) SD FIFO

Specifies access permissions for users other than the owner who are not in the group specified for a file. This category of users is usually referred to as other in UNIX. The expression is a character string evaluating to null or to any combination of the letters RWX, indicating respectively Read, Write, and eXecute access. When any one of these deviceparameters appear on an OPEN of an existing file, any user category that is not explicitly specified remains unchanged.

To modify file security, the user who issues the OPEN must have ownership.

By default, OPEN and CLOSE do not modify the permissions on an existing file. Unless otherwise specified, when OPEN creates a new file, it establishes security using standard defaulting rules.

Example:

OPEN "test51.txt":(NEWVERSION:WORLD="rw")

This example opens file test51.txt and specifies Read Write permission for users not in owner's group.

[NO]WRAP Applies to: TRM SD NULL FIFO PIPE SOC

Enables or disables automatic record termination. When the current record size ($X) reaches the maximum WIDTH and the device has WRAP enabled, GT.M starts a new record, as if the routine had issued a WRITE ! Command. When reading, WRAP only determines whether $X remains within the range of zero to WIDTH.

Note that WRAP is enabled by default for SD, NULL, FIFO, PIPE and SOCKET. For TRM, WRAP is enabled by default if the terminfo variable auto_right_margin (capname "am") is set.

NOWRAP causes GT.M to require a WRITE ! to terminate the record. NOWRAP allows $X to become greater than the device WIDTH for terminals and null devices.

The combination of STREAM and NOWRAP on disk files allows you to write data of arbitrary length without truncation. Without the STREAM option, the WRAP option determines the action taken when the record length exceeds the device WIDTH. NOWRAP causes GT.M to truncate the record, while WRAP causes GT.M to insert a format control character except for FIXED format.

NOTE: FIFO, SD and SOCKET devices opened as $PRINCIPAL (at process start-up) default to NOWRAP and for SD and FIFO devices, STREAM.

[NO]WRITEONLY Applies to: PIPE

The WRITEONLY deviceparameter specifies that the PIPE acts only to send its output to the created process. Any attempt to READ from such a PIPE triggers an error. Note that when you open a PIPE with both STDERR and WRITEONLY you can still READ from the STDERR device.

ZBFSIZE Applies to: SOC

Allocates a buffer used by GT.M when reading from a socket. The ZBFSIZE deviceparameter should be at least as big as the largest message expected.

By default, the size of ZBFSIZE is 1024 and the maximum it can be is 1048576.

Z[NO]DELAY Applies to: SOC(TCP)

Controls buffering of data packets by the system TCP stack using the TCP_NODELAY option to the setsockopt system call. This behavior is sometimes known as the Nagle algorithm. The default is ZDELAY. This delays sending additional packets until either an acknowledgment of previous packets is received or an interval passes. If several packets are sent from one end of a connection before the other end responds, setting ZNODELAY may be desirable though at the cost of additional packets being transmitted over the network. ZNODELAY must be fully spelled out.

LOCAL sockets ignore the ZDELAY deviceparameter.

Example:

open tcpdev:(LISTEN=portno_":TCP":attach="server":zbfsize=2048:zibfsize=1024):timeout:"SOCKET"

This example opens the socket device tcpdev and allocates a buffer size of 2048 bytes.

Z[NO]FF=expr Applied to: SOC

expr specifies a string of characters, typically in $CHAR() format to send to socket device, whenever a routine issues a WRITE #. When no string is specified or when ZFF="", then no characters are sent. The default in GT.M is ZNOFF.

ZIBFSIZE Applies to: SOC

Sets the buffer size used by the network software (setsockopt SO_RCVBUF).

The default and the maximum values depend on the platform and/or system parameters.

Note that LOCAL sockets ignore the ZIBFSIZE deviceparameter.

ATTACH=expr Applies to: SOC

expr specifies the handle for a socket in the socketpool. ATTACH looks up expr in the socketpool's collection of sockets and brings the one found to the current SOCKET device. If an ATTACH operation is successful, the attached socket becomes the current socket for the device.

ATTACH is not compatible with any other device parameters in the USE command.A socket can move from one device to another using DETACH/ATTACH.

	Note
	A socket does not carry [I|O]CHSET with it while being moved. Such a socket uses the [I|O]CHSET of the device it is ATTACHed to. If there is input still buffered, this may cause unintentional consequences in the application if [I|O]CHSET changes. GT.M does not detect (or report) a change in [I|O]CHSET due to DETACH/ATTACH.

For information on using the ATTACH with OPEN, refer to “ATTACH” in the OPEN Deviceparameters section.

[NO]CANONICAL Applies to: TRM

Enables or disables canonical input as controlled by the ICANON terminal attribute. See the documentation on your platform for details, but in general this would be erase and kill edit functions, and lines delimited by NL (usually <LF>), EOF (usually ^D), and EOL (usually not defined).

By default, canonical input is enabled (that is [NO]CANONICAL is the default).

[NO]CENABLE Applies to: TRM

Enables or disables the ability to force GT.M into Direct Mode by entering <CTRL-C> at $PRINCIPAL.

If CENABLE is set, <CTRL-C> interrupts process execution. For more information on interrupt handling, refer to “Interrupt Handling”.

By default, CENABLE is set. If CTRAP contains $C(3), CENABLE is disabled.

Example:

use $principal:(nocenable:ctrap="":exception="") 

CLEARSCREEN Applies to: TRM

Clears the terminal screen from the present cursor position to the bottom of the screen. The CLEARSCREEN deviceparameter does not change the cursor position or the $X and $Y variables.

Example:

U $P:(X=0:Y=0:CLEAR)

This example positions the cursor to "home" in the upper left corner of a VDT and clears the entire current screen "page."

CONNECT=expr Applies to: SOC

Enables a client connection with a server, which is located by the information provided by expr. A new socket is allocated for the client connection and is made the current socket for the device, if the operation is successful.

expr specifies the protocol and the protocol-specific information. Currently, GT.M supports TCP/IP and LOCAL (also known as UNIX domain) socket protocols.

For more information, refer to “CONNECT”.

	Note
	CONNECT is not compatible with LISTEN.

Although CONNECT can be used with USE command, FIS recommends not to use it that way, because unlike the OPEN command, there is no way to specify a timeout to the USE command. CONNECT in the USE command take a default timeout value of 0.

Example:

Refer to the "CONNECT" examples in “Examples of OPEN”.

[NO]CONVERT Applies to: TRM

Enables or disables GT.M from converting lowercase input to uppercase during READs.

By default, the terminal device driver operates NOCONVERT.

Example:

use $principal:(convert) 
READ X

This example converts all lowercase to uppercase during READ X.

CTRAP=expr Applies to: TRM

Establishes the <CTRL> characters in the expression as trap characters for the current device. When a READ from a device receives a trap character, GT.M interrupts process execution. The device does not have to be the current device, that is $IO.

The <CTRL> characters are ASCII 0 though 31. However terminal configuration may prevent of most <CTRL> characters from ever reaching GT.M's CTRAP facility.

For example, the command U $P:CTRAP=$C(26,30,7,19) sets a trap for the ASCII characters <SUB>, <RS>, <BEL> and <DC3>.

Specifying CTRAP completely replaces the previous CTRAP list. Setting CTRAP to the null string ("") disables character trapping.

A trap character enabled by CTRAP produces one of the following actions:

For more information on error handling, refer to Chapter 13: “Error Processing”.

When CTRAP includes <CTRL-C>, [NO]CENABLE has no effect. CTRAPping <CTRL-C> also takes precedence over CENABLE.

[NO]DELIMITER Applies to: SOC

DELIMITER establishes or replaces the list of delimiters used by the current socket. The default is NODELIMITER.

expr must be a string of the following format:

	Note
	expr "ab:/:://:bc" is interpreted as four delimiters, which are "ab", ":", "/", and "bc". One socket can have 0-64 delimiters and each delimiter can contain 1-64 characters.

Example:

See "Socket (server.m)" example.

DETACH=expr Applies to: SOC

Removes the socket identified by expr from the current socket device, without affecting any existing connection of that socket. The removed socket is placed in the socketpool and may be attached to another socket device. If the socket being removed is the current socket, then GT.M does the following:

	Note
	A socket can move from one device to another using DETACH/ATTACH. A socket does not carry [I|O]CHSET with it while being moved. Such a socket uses the [I|O]CHSET of the device it is ATTACHed to. If there is input still buffered, this may cause unintentional consequences in the application if [I|O]CHSET changes. GT.M does not detect (or report) a change in [I|O]CHSET due to DETACH/ATTACH.

Example:

GTM>set tcp="seerv" open tcp:(listen="6321:TCP":attach="serv")::"SOCKET"
GTM>zshow "D"
/dev/pts/9 OPEN TERMINAL NOPAST NOESCA NOREADS TYPE WIDTH=80 LENG=24
seerv OPEN SOCKET TOTAL=1 CURRENT=0
    SOCKET[0]=serv DESC=3 LISTENING PASSIVE NOTRAP PORT=6321
         ZDELAY ZBFSIZE=1024 ZIBFSIZE=87380 NODELIMITER
GTM>set tcp="seerv" o tcp:(listen="6322:TCP":attach="serv2")::"SOCKET"
GTM>zshow "D"
/dev/pts/9 OPEN TERMINAL NOPAST NOESCA NOREADS TYPE WIDTH=80 LENG=24
seerv OPEN SOCKET TOTAL=2 CURRENT=1
    SOCKET[0]=serv DESC=3 LISTENING PASSIVE NOTRAP PORT=6321
         ZDELAY ZBFSIZE=1024 ZIBFSIZE=87380 NODELIMITER
    SOCKET[1]=serv2 DESC=4 LISTENING PASSIVE NOTRAP PORT=6322
         ZDELAY ZBFSIZE=1024 ZIBFSIZE=87380 NODELIMITER

At this point, the socket device "seerv" has two sockets associated with it.

The following command moves the "serv" socket to the "socketpool" device.

GTM>use tcp:detach="serv"
GTM>use 0 zshow "D"
/dev/pts/9 OPEN TERMINAL NOPAST NOESCA NOREADS TYPE WIDTH=80 LENG=24
seerv OPEN SOCKET TOTAL=1 CURRENT=0
    SOCKET[0]=serv2 DESC=4 LISTENING PASSIVE NOTRAP PORT=6322
         ZDELAY ZBFSIZE=1024 ZIBFSIZE=87380 NODELIMITER
socketpool OPEN SOCKET TOTAL=1 CURRENT=0
    SOCKET[0]=serv DESC=3 LISTENING PASSIVE NOTRAP PORT=6321
         ZDELAY ZBFSIZE=1024 ZIBFSIZE=87380 NODELIMITER

Notice how socket "serv" is now associated with the pseudo socket device "socketpool". Its only purpose is to hold detached sockets.

GTM>set tcp2="s2" o tcp2:::"SOCKET"

This creates a new socket device.

GTM>zshow "D"
/dev/pts/9 OPEN TERMINAL NOPAST NOESCA NOREADS TYPE WIDTH=80 LENG=24
 s2 OPEN SOCKET TOTAL=0 CURRENT=0
seerv OPEN SOCKET TOTAL=1 CURRENT=0
    SOCKET[0]=serv2 DESC=4 LISTENING PASSIVE NOTRAP PORT=6322
        ZDELAY ZBFSIZE=1024 ZIBFSIZE=87380 NODELIMITER
socketpool OPEN SOCKET TOTAL=1 CURRENT=0
    SOCKET[0]=serv DESC=3 LISTENING PASSIVE NOTRAP PORT=6321
        ZDELAY ZBFSIZE=1024 ZIBFSIZE=87380 NODELIMITER

The following command moves the serv socket from the socketpool to the tcp2 device.

GTM>use tcp2:attach="serv"
GTM>use 0 zshow "D"
/dev/pts/9 OPEN TERMINAL NOPAST NOESCA NOREADS TYPE WIDTH=80 LENG=24
s2 OPEN SOCKET TOTAL=1 CURRENT=0
   SOCKET[0]=serv DESC=3 LISTENING PASSIVE NOTRAP PORT=6321
       ZDELAY ZBFSIZE=1024 ZIBFSIZE=87380 NODELIMITER
seerv OPEN SOCKET TOTAL=1 CURRENT=0
   SOCKET[0]=serv2 DESC=4 LISTENING PASSIVE NOTRAP PORT=6322
       ZDELAY ZBFSIZE=1024 ZIBFSIZE=87380 NODELIMITER
socketpool OPEN SOCKET TOTAL=0 CURRENT=-1

DOWNSCROLL Applies to: TRM

If $Y=0, DOWNSCROLL does nothing. Otherwise, DOWNSCROLL moves the cursor up one line on the terminal screen and decrements $Y by one. DOWNSCROLL does not change the column position or $X. Some terminal hardware may not support DOWNSCROLL.

[NO]ECHO Applies to: TRM

Enables or disables the echo of terminal input. If you disable ECHO, the EDITING functions will be disabled and any input is not available for later recall.

By default, terminal input ECHOes.

Example:

use $principal:noecho

This example disables the echo of terminal input.

[NO]EDITING Applies to: TRM

Enables the EDITING mode for the $PRINCIPAL device. If you enable EDITING, GT.M allows the use of the left and right cursor movement keys and certain <CTRL> characters within the current input line. You can recall the last input line using the up or down arrow key. The editing functions are the same as during direct mode command input as described in the "Line Editing" section of the "Operating & Debugging in Direct Mode" chapter except that backspace is not treated the same as the erase character from terminfo which is usually delete (ASCII 127). NOECHO disables EDITING mode.

Set the environment variable gtm_principal_editing to specify the mode for EDITING. For example, gtm_principal_editing="EDITING" enables EDITING mode at GT.M startup. You can also specify the mode for INSERT. For example, gtm_principal_editing="NOINSERT:EDITING". If you specify both modes then separate them with a colon (":") and put them in any order.

By default, EDITING mode is disabled.

If you enable the EDITING mode, escape sequences do not terminate READs.

Enabling PASTHRU mode supersedes EDITING mode.

If any of the EDITING <CTRL> characters are in the CTRAP list, their editing functions are not available since CTRAP takes precedence. However the EDITING <CTRL> characters takes precedence over the TERMINATOR list.

	Note
	M READ EDITING depends on the values of $X and $Y being correct. If the application sends its own escape sequences or control characters, which change the cursor position, it must properly update $X and $Y before doing a M READ with EDITING enabled to ensure correct formatting during input.

[NO]EMPT[ERM] Applies to: TRM

Allows an "Erase" character on an empty input line to terminate a READ or READ # command. The default is NOEMPTERM. The gtm_principal_editing environment variable specifies the initial setting of [NO]EMPTERM. The TERMINFO specified by the current value of the TERM environment variable defines capnames values "kbs" and/or "kdch1" with character sequences for "Erase." If "kbs" or "kdch1" are multi-character values, you must also specify the ESCAPE or EDIT deviceparameters for EMPTERM recognition.

The erase character as set and shown by stty also terminates a READ command with an empty input line. You can set this erase character to various values using the stty shell command. Typical values of an erase character are <CTRL-H> and <CTRL-?>. Characters set and shown with stty setting must match what the terminal emulator sends.

The environment variable TERM must specify a terminfo entry that matches both what the terminal (or terminal emulator) sends and expects.

ERASELINE Applies to: TRM

Clears the current line from the physical cursor position to the end of the line. ERASELINE does not affect the physical cursor position, or $X and $Y.

[NO]ESCAPE Applies to: TRM

Enables or disables GT.M processing of escape sequences.

The following events result when a terminal has ESCAPE sequence processing enabled. When an <ESC> or <CSI> arrives in the terminal input, the device driver verifies the sequence that follows as a valid ANSI escape sequence, terminates the READ, and sets $ZB to contain the entire escape sequence. In the case of a READ * when ESCAPE sequence processing is enabled and an escape introducer is read, the entire escape sequence is returned in $ZB and the ASCII representation of the first character is returned in the argument of the READ *.

When escape processing is disabled, READ *x returns 27 in x for an <ESC>. If the escape introducer is also a TERMINATOR, $ZB has a string of length one (1), and a value of the $ASCII() representation of the escape introducer; otherwise, $ZB holds the empty string. For single character and short fixed reads with NOESCAPE, the remaining characters in the escape sequence will be in the input stream for subsequent READS regardless of [NO]TYPEAHEAD.

An application that operates with (NOESCAPE:TERM=$C(13)) must provide successive READ * commands to remove the remaining characters in the escape sequence from the input stream.

By default, ESCAPE processing is disabled.

Example:

use $principal:(noescape:term=$c(13)) 

This example disables the escape sequence processing and set $c(13) as the line terminator.

EXCEPTION=expr Applies to: All devices

Defines an error handler for an I/O device. The expression must contain a fragment of GT.M code (for example, GOTO ERRFILE) that GT.M XECUTEs when the driver for the device detects an error, or an entryref to which GT.M transfers control, as appropriate for the current gtm_ztrap_form.

For more information on error handling, refer to Chapter 13: “Error Processing”.

[NO]FFLF Applies to: SD

The [NO]FFLF deviceparameter controls whether WRITE # produces only a form-feed (<FF>) or a form-feed and line-feed (<FF><LF>). Previously, GT.M used <FF><LF> which deviated from the standard, but out of concern for existing practice the default remains <FF><LF>.

Additionally, the "gtm_nofflf" environment variable controls the default WRITE # behavior of GT.M. If it is unset or set to 0, N[O] or F[ALSE], the default behavior is unchanged. If it is set to 1, Y[ES] or T[RUE], the default behavior of WRITE # is changed to produce only a form-feed (<FF>), though M programs can still control behavior by specifying the FFLF deviceparameter.

For an example, refer to the description of FFLF deviceparameter of OPEN.

[NO]FILTER[=expr] Applies to: TRM SOC NULL

Specifies character filtering for specified cursor movement sequences. Filtering requires character by character examination of all output and reduces I/O performance.

Each FILTER deviceparameter can have only one argument. However, multiple FILTER deviceparameters can appear in a single USE command, each with different arguments.

The valid values for expr:

By default, GT.M does not perform output filtering. For GT.M to maintain $X for non-graphic characters as described by the standard, FILTER="CHARACTERS" must be enabled. Output filtering adds additional overhead to I/O processing.

Example:

use tcpdev:filter="NOESCAPE" 

This example removes the effect of escape sequences on the maintenance $X and $Y.

[NO]FOLLOW Applies to: SD

Configures READ to return only when it has a complete record or reaches any specified timeout; it waits for more input rather than terminating on an EOF (end-of-file) condition.

The USE command can switch a device from NOFOLLOW to FOLLOW or from FOLLOW to NOFOLLOW. This provides a READ mode of operation similar to a tail -f in UNIX.

[NO]HOSTSYNC Applies to: TRM

Enables or disables the use of XON/XOFF by the host to throttle input and prevent impending buffer overruns for a terminal. This deviceparameter provides a control mechanism for the host over asynchronous communication lines to help prevent data loss when hardware is slow and/or processing load is high.

By default, HOSTSYNC is disabled.

[NO]HUPENABLE Applies to: TRM

Enables or disables the recognition by the process of the loss ("hang up") of PRINCIPAL device terminal. When enabled the proces receives an TERMHANGUP error if the O/S signals that the terminal assigned to the process as the PRINCIPAL device has disconnected. If GT.M is configured to ignore such a signal, a process may subsequently receive an IOEOF or a TERMWRITE error from an attempt to respectively READ from, or WRITE to the missing device. GT.M terminates a process that ignores more than one of these messages and, if the process is not in Direct Mode, sends a NOPRINCIO message to the operator log.

If defined, the gtm_hupeable environment variable determines the initial process behavior, and if that is undefined GT.M does not immeidately report a terminal disconnect.

Applies to: SD, PIPE, and FIFO

IKEY allows the use of a seperate key to READ from a device; for example, when a GT.M process is an element of a UNIX pipe. The format of the IKEY deviceparameter is:

IKEY="key_name [IV]"

key_name is case-sensitive and must match a key name in the "files" section of the gtmcrypt_config file. The optional IV specifies an initialization vector to use for encryption and decryption.

For more information, refer to the description of KEY deviceparameter of OPEN.

Applies to: SD

Performs a REWIND on input when $PRINCIPAL identifies a device that supports REWIND. Use this deviceparameter with $PRINCIPAL when redirected from a file. For more information, refer to “SEEK=strexpr”.

Applies to: SD

Performs a SEEK on input when $PRINCIPAL identifies a device that supports SEEK. Use this deviceparameter with $PRINCIPAL when redirected from a file. For more information, refer to “SEEK=strexpr”.

[NO]INSERT Applies to: TRM

Enables or disables insert mode for the $PRINCIPAL device. If INSERT mode is enabled, GT.M inserts input characters at the logical position in the input stream designated by the virtual cursor as defined by $X and $Y, for example in the middle of the line/record. If INSERT mode is disabled, input characters overwrite the existing characters in the input stream at the logical position designated by the virtual cursor. You can toggle the insert mode within a direct mode line or if EDITING is enabled for a single READ argument's input using the terminal's INSERT key. The INSERT mode is reset to the default or what was last specified with USE at the beginning of each direct mode line or READ argument.

IOERROR=expr Applies to: SOC

Enables exception handling in socket devices. expr specifies the I/O error trapping mode. A value equal to "TRAP" specifies that I/O errors on a device raise error conditions. A value equal to "NOTRAP", or when IOERROR is not specified, indicates that an I/O error on a device does not raise error conditions.

	Note
	GT.M currently handles exception handling at device level instead of socket level.

Example:

use sock:(ioerror="TRAP":exception="zgoto "_$zlevel_":error") 

This example enables exception handling in socket device sock and specifies that all I/O errors on sock raise the error condition.

If $LENGTH(strexpr)&("Tt"[$EXTRACT(strexpr)) then Error Trapping is enabled; otherwise the application must check $DEVICE for errors.

Applies to: SD, PIPE, and FIFO

Specifies information about the key file to use for reading and writing encrypted data. The syntax of the KEY deviceparameter is as follows:

KEY="key_name [IV]"

key_name is case-sensitive and must match a key name in the "files" section of the gtmcrypt_config file. The optional IV specifies an initialization vector to use for encryption and decryption.

For more information and an example, refer to the description of KEY deviceparameter of OPEN.

[Z]LENGTH=intexpr Applies to: TRM SOC SD FIFO PIPE NULL

Sets the virtual page length for an I/O device to the integer expression. You can specify the virtual page length up to 1,048,576. The page length controls the point at which the device driver automatically resets $Y to 0.

By default, for terminals, GT.M uses the terminfo variable lines (which may be from the terminal definition or from a stty command) as the initial value for LENGTH. The default length for null device and socket device is 66.

Setting LENGTH to zero prevents resetting $Y to zero.

Example:

use sock:(width=80:znoff:zlength=24) 

This example sets the virtual page length to 24 for socket device sock.

LISTEN=expr Applies to: SOC

A new socket is allocated to listen for a connection. It is made the current socket for the device, if the operation is successful.

expr specifies the protocol and the protocol-specific information. Currently, GT.M supports TCP/IP and LOCAL (also known as UNIX domain) socket protocols.

For more information, refer to “LISTEN”.

Example:

GTM>set tcp="seerv" open tcp:(listen="6321:TCP":attach="serv")::"SOCKET"
GTM>use tcp:listen="6322:TCP"
GTM>use 0 zshow "D"
/dev/pts/9 OPEN TERMINAL NOPAST NOESCA NOREADS TYPE WIDTH=80 LENG=24
seerv OPEN SOCKET TOTAL=2 CURRENT=1
SOCKET[0]=serv DESC=3 LISTENING PASSIVE NOTRAP PORT=6321
     ZDELAY ZBFSIZE=1024 ZIBFSIZE=87380 NODELIMITER
SOCKET[1]=h12185825450 DESC=4 LISTENING PASSIVE NOTRAP PORT=6322
     ZDELAY ZBFSIZE=1024 ZIBFSIZE=87380 NODELIMITER

Applies to: SD, PIPE, and FIFO

OKEY allows the use of a seperate key for WRITE to a device; for example, when a GT.M process is an element of a UNIX pipe. The format of the IKEY deviceparameter is:

OKEY="key_name [IV]"

key_name is case-sensitive and must match a key name in the "files" section of the gtmcrypt_config file. The optional IV specifies an initialization vector to use for encryption and decryption.

For more information, refer to the description of KEY deviceparameter of OPEN.

Applies to: SD

Performs a REWIND on output when $PRINCIPAL identifies a device that supports REWIND. Use this deviceparameter with $PRINCIPAL when redirected to a file. For more information, refer to “REWIND”.

Applies to: SD

Performs a SEEK on output when $PRINCIPAL identifies a device that supports SEEK. Use this deviceparameter with $PRINCIPAL when redirected to a file. For more information, refer to “SEEK=strexpr”.

[NO]PASTHRU Applies to: TRM

Enables or disables interpretation of the ERASE character for a terminal. PASTHRU shifts management of handling and response to ERASE characters in the input stream from GT.M to the application code.

Exercise caution with PASTHRU in debugging, because using a PASTHRU terminal in Direct Mode is somewhat awkward.

[NO]TTSYNC must be used with [NO]PASTHRU to control XON/XOFF handling.

By default, the device driver operates NOPASTHRU.

PASTHRU supersedes line editing.

[NO]READSYNC Applies to: TRM

Enables or disables automatic output of <XON> before a READ and <XOFF> after a READ.

By default, the terminal drivers operate NOREADSYNC.

REWIND Applies to: SD

REWIND places the file pointer to the beginning of the file.

By default, USE does not REWIND.

REWIND on redirected output for $PRINCIPAL is the same as OUTREWIND.

SEEK Applies to: SD

Positions the current file pointer to the location specified in strexpr. The format of strexpr is a string of the form "[+|-]integer" where an unsigned value specifies an offset from the beginning of the file, and an explicitly signed value specifies an offset relative to the current file position. For STREAM or VARIABLE format, the positive intexpr after any sign is a byte offset, while for a FIXED format, it is a record offset. In order to deal with the possible presence of a Byte Order Marker (BOM), SEEK for a FIXED format file written in a UTF character set must follow at least one prior READ since the device was created.

SEEK on redirected input for $PRINCIPAL is the same as INSEEK.

SOCKET=expr Applies to: SOC

Makes the socket specified by the handle named in expr the current socket for the Socket device . If the named socket is a listening socket, it checks for an incoming connection request and if one is available, it accepts the request and creates a new connected socket in which case $KEY provides information on the new socket Specifying a socket handle not contained in the Socket device generates an error.

	Note
	SOCKET is compatible with DELIMITER only.

For a usage example, refer to the socketexamplemulti2.m in the Section : “Socket Device Examples”.

[NO]TERMINATOR[=expr] Applies to: TRM

Specifies which of the 256 ASCII characters terminate a READ. For example, TERMINATOR=$C(0) makes <NUL> the terminator.

When NOESCAPE is in effect, TERMINATOR controls whether or not <ESC> or <CSI> are treated as terminators, however, when ESCAPE processing is enabled, the entire escape sequence is treated as a terminator regardless of the TERMINATOR specification.

When EDITING is enabled, the control characters used for editing are not treated as terminators even if they are in the TERMINATOR list.

You can define any control character as a terminator, but they are all single character.

When the terminal is in UTF-8 mode (chset=utf8,) GT.M limits the terminator characters to the first 127 which are common between ASCII and UTF-8 encodng. In M mode, any of the 256 characters may be specified a terminator.

In UTF-8 mode, if CR is in the terminator list (either by default or explicitly,) GT.M ignore the following LF to keep with the standard Unicode® line terminator definitions.

NOTERMINATOR eliminates all terminators. When a terminal has all terminators disabled, fixed length READ and READ * terminate on receipt of some number of characters, and a timed READ terminates on timeout, but any other READ only terminates when the input fills the terminal read buffer.

By default, terminals recognize <CR>, <LF>, and <ESC> as terminators (that is, TERMINATOR=$C(10, 13,27)). TERMINATOR="" restores the default. In UTF-8 mode, the usual UTF-8 line terminators are also included in the default set of terminators.

Example:

GTM> USE $P:TERM=$C(26,13,11,7)

This example enables the ASCII characters <SUB>, <CR>, <VT> and <BEL> as READ terminators.

[NO]TRUNCATE Applies to: SD

Enables or disables overwriting of existing data in sequential files. Because the position of each record depends on the prior record, a WRITE destroys the ability to reliably position to subsequent records in a file. Therefore, by default (NOTRUNCATE), GT.M permits WRITEs only when the file pointer is positioned at the end-of-file. When a device has TRUNCATE enabled, a WRITE issued when the file pointer is not at end-of-file truncates the file by destroying all data from the file pointer to the end-of-file.

By default, OPEN accesses files NOTRUNCATE, which does not allow overwriting of sequential files.

This deviceparameter may not be supported by your platform.

[NO]TTSYNC Applies to: TRM

Enables or disables recognition of XON/XOFF for terminal output.

	Note
	A terminal may have its own handling of XON/XOFF, controlled by a set-up mode or by switches. If an application requires program recognition of <CTRL-S> and <CTRL-Q>, the terminals may require reconfiguration.

[NO]TYPEAHEAD Applies to: TRM

Enables or disables type-ahead buffering for a terminal. When TYPEAHEAD is disabled, any pending input which has not yet been read will be discarded before input is read for each READ argument. When TYPEAHEAD is enabled, any input not read by one READ argument will remain available for the next READ argument or command.

The size of the type-ahead buffer limits the amount of data entered at the terminal that the device driver can store in anticipation of future READs.

By default, the terminal device driver accepts TYPEAHEAD.

UPSCROLL Applies to: TRM

Moves the cursor down one line on the terminal screen. If $Y=LENGTH-1, UPSCROLL sets $Y=0. Otherwise UPSCROLL increments $Y by one. If the cursor is physically at the bottom of the page, the screen scrolls up one line. UPSCROLL does not change the column position or $X.

[Z]WIDTH=intexpr Applies to: TRM SOC NULL SD FIFO PIPE

Sets the device's logical record size and enables WRAP. The default WIDTH for SOC, SD and FIFO is taken from the RECORDSIZE.

NOWRAP and WIDTH supersede each other. When WIDTH and NOWRAP appear together on the same USE command, the final one controls the device behavior. For a terminal, WIDTH=0 is equivalent to WIDTH=n:NOWRAP, where n is the default length of a logical record on that terminal.

Terminals inherit their default WIDTH in GT.M from the invoking shell environment. The default WIDTH for null and socket device is 255.

For SD and SOC which support 1MB strings, you can specify WIDTH up to 1,048,576.

In UTF-8 mode and TRM, SOC, SD, and FIFO output, the WIDTH deviceparameter is in units of display-columns and is used with $X to control truncation and WRAPing for output and maintenance of $X and $Y for input.

In UTF-8 mode and SOC, the WIDTH deviceparameter is in units of UTF-8 code points and is used with $X to control truncation and wrapping for output and maintenance of $X and $Y for input.

In M mode if WIDTH is set to 0, GT.M uses the default WIDTH of the TRM and SOC devices. USE x:WIDTH=0 is equivalent to USE x:(WIDTH=<device-default>:NOWRAP. For SOC, SD and FIFO devices in M mode, the device default is the RECORDSIZE.

GT.M format control characters, FILTER, and the device WIDTH and WRAP also have an effect on $X.

In UTF-8 mode and SOC output, the WIDTH deviceparameter specifies the number of UTF-8 characters.

[NO]WRAP Applies to: TRM SOC NULL SD FIFO PIPE

Enables or disables automatic record termination. When the current record size ($X) reaches the maximum WIDTH and the device has WRAP enabled, GT.M starts a new record, as if the routine had issued a WRITE ! command. When reading, WRAP only determines whether $X remains within the range of zero to WIDTH.

Note that WRAP is enabled by default for SD, NULL, FIFO, PIPE and SOCKET. For TRM, WRAP is enabled by default if the terminfo variable auto_right_margin (capname "am") is set.

NOWRAP causes GT.M to require a WRITE ! to terminate the record. NOWRAP allows $X to become greater than the device WIDTH for terminals and null devices.

The combination of STREAM and NOWRAP on disk files allows you to write data of arbitrary length without truncation. Without the STREAM option, the WRAP option determines the action taken when the record length exceeds the device WIDTH. NOWRAP causes GT.M to truncate the record, while WRAP causes GT.M to insert a format control character except for FIXED format.

Example:

See WRAP examples in the OPEN deviceparameters section.

X=intexpr Applies to: TRM

$X positions the cursor to a vertical column on the terminal. If NOWRAP is enabled or intexpr<WIDTH, GT.M sets $X=intexpr. If WRAP is enabled and intexpr>WIDTH, GT.M sets $X=intexpr#WIDTH, where # is the GT.M modulo operator. The resulting $X determines the actual physical position.

To ensure that $Y and $X match what is occurring visually on the terminal, the GT.M deviceparameters and the device characteristics must match at all times.

The terminal hardware may affect physical cursor positioning. The X deviceparameter does not change the cursor row or update $Y.

Y=intexpr Applies to: TRM

Positions the cursor to a horizontal row on the terminal.

GT.M sets $Y=intexpr#LENGTH, where # is the GT.M modulo operator. If intexpr<LENGTH, the resulting $Y determines the physical position. If intexpr>LENGTH, the cursor is positioned so that $Y=intexpr#LENGTH, where # is the GT.M module operator. The terminal hardware may affect physical cursor positioning.

To ensure that $Y and $X match what is occurring visually on the terminal, the GT.M deviceparameters and the device characteristics must match at all times. For example, if a process initiates a subprocess that changes the terminal wrap setting from NOWRAP, previously set with the GT.M USE command to WRAP , GT.M does not reflect the change when the subprocess completes. Therefore, wraps on the terminal do not reflect in the values of $X and $Y.

The Y deviceparameter does not change the cursor column or update $X.

ZBFSIZE Applies to: SOC

Allocates a buffer used by GT.M when reading from a socket. The ZBFSIZE deviceparameter should be at least as big as the largest message expected.

By default, the size of ZBFSIZE is 1024 and the maximum it can be is 1048576.

Z[NO]DELAY Applies to: SOC

Controls buffering of data packets by the system TCP stack using the TCP_NODELAY option to the SETSOCKOPT system call. This behavior is sometimes known as the Nagle algorithm. The default is ZDELAY. This delays sending additional packets until either an acknowledgement of previous packets is received or an interval passes. If several packets are sent from one end of a connection before the other end responds, setting ZNODELAY may be desirable though at the cost of additional packets being transmitted over the network. ZNODELAY must be fully spelled out.

Z[NO]FF=expr Applies to: SOC

expr specifies a string of characters, typically in $CHAR() format to send to socket device, whenever a routine issues a WRITE #. When no string is specified or when ZFF="", then no characters are sent. The default in GT.M is ZNOFF.

Example:

u tcpdev:(zwidth=80:zff=$char(13):zlength=24) 

This example sends $char(13) to the current socket of device tcpdev on every WRITE #.

ZIBFSIZE Applies to: SOC

Sets the buffer size used by the network software (setsockopt SO_RCVBUF).

The default and the maximum values depend on the platform and/or system parameters.

Note that LOCAL sockets ignore the ZIBFSIZE deviceparameter.

DELETE Applies to: SD FIFO SOC(LOCAL)

Instructs GT.M to delete the disk file after GT.M closes it.

[NO]DESTROY Applies to: SD, FIFO, SOC

Determines whether the process retains device characteristics after CLOSE. The default is DESTROY for sequential disk files and FIFO devices and NODESTROY for SOCKET devices. While NODESTROY allows the re-OPEN of previously CLOSE'd device with the same characteristics as when it was last CLOSE'd, as described by the M standard, every tracked device uses process memory. A device that has been DESTROYed on CLOSE cannot be re-opened with the previous characteristics, but reclaims memory used by the process for that device. [NO]DESTROY is ignored for CLOSE of a specific socket rather than the entire socket device.

Because it forms a communication link with a process it creates, CLOSE of a PIPE device always eliminates the device and hence ignores any [NO]DESTROY deviceparameter.

EXCEPTION=expr Applies to: All devices

Defines an error handler for an I/O device. The expression must contain a fragment of GT.M code (for example, GOTO ERRFILE) that GT.M XECUTEs when the driver for the device detects an error, or an entryref to which GT.M transfers control, as appropriate for the current gtm_ztrap_form.

The expression must contain a fragment of GT.M code (for example, GOTO ERRFILE) that GT.M XECUTEs when the driver for the device detects an error, or an entryref to which GT.M transfers control, as appropriate for the current gtm_ztrap_form.

For more information on error handling, refer to Chapter 13: “Error Processing”.

GROUP=expr Applies to: SOC(LOCAL), SD, FIFO

Specifies access permission on a UNIX file for other users in the file owner's group. The expression is a character string evaluating to null or to any combination of the letters RWX, indicating respectively Read, Write, and eXecute access. When any one of these deviceparameters (OWNER, GROUP, WORLD) appear on a CLOSE of an existing file, any user category, that is not explicitly specified remains unchanged.

In order to modify file security, the user who issues the CLOSE must have ownership.

By default, CLOSE does not modify the permissions on an existing file.

OWNER=expr Applies to: SOC(LOCAL) SD FIFO

Specifies access permission on a UNIX file for the owner of the file. The expression is a character string evaluating to null or to any combination of the letters RWX, indicating respectively Read, Write, and eXecute access. When any one of these deviceparameters appear on a CLOSE of an existing file, any user category (GROUP, SYSTEM, WORLD), that is not explicitly specified remains unchanged.

In order to modify file security, the user who issues the CLOSE must have ownership.

By default, CLOSE does not modify the permissions on an existing file.

RENAME=expr Applies to: SD

Changes the file name to the name contained in the argument string. When the expression omits part of the pathname, GT.M constructs the full pathname by applying the defaults discussed in the section on device specifications.

If the process has sufficient access permissions, it may use RENAME to specify a different directory as well as file name. RENAME cannot move a file to a different filesystem.

SOCKET=expr Applies to: SOC

The socket specified in expr is closed. Specifying a socket that has not been previously OPENed generates an error. If no SOCKET deviceparameter is specified on a CLOSE for a socket device, the socket device and all sockets associated with it are closed.

SYSTEM=expr Applies to: SOC(LOCAL) SD FIFO

This deviceparameter is a synonym for OWNER that is maintained in UNIX for compatibility with VMS applications.

By default, CLOSE does not modify the permissions on an existing file.

TIMEOUT=expr Applies to: PIPE

Performs a timed check (in seconds) on the termination status of the PIPE co-process of a PIPE device that is not OPEN'd with the INDEPENDENT deviceparameter. intexpr specifies time in seconds. The default is 2 seconds if TIMEOUT is not specified.

UIC=exprgroup number Applies to: SOC(LOCAL) SD FIFO

Specifies the group that has access to the file. The format of the string is "g,i" where g is a decimal number representing the group portion of the UIC and i is a decimal number representing the individual portion.

Specifies the owner and affects access to the file. The expression evaluates to the numeric identifier of the new owner.

WORLD=expr Applies to: SOC(LOCAL) SD FIFO

Specifies access permissions for users not in the owner's group on a UNIX file. The expression is a character string evaluating to null or to any combination of the letters RWX, indicating respectively Read, Write, and eXecute access. When any one of these deviceparameters (OWNER, GROUP, WORLD) appears on a CLOSE of a new file, any user category that is not explicitly specified is given the default character string. When any one of these deviceparameters (OWNER, GROUP, WORLD) appears on a CLOSE of an existing file, any user category , that is not explicitly specified remains unchanged.

In order to modify file security, the user who issues the CLOSE must have ownership.

By default, CLOSE and CLOSE do not modify the permissions on an existing file. Unless otherwise specified, when CLOSE creates a new file, it establishes security using standard defaulting rules.

In order to modify file security, the user who issues the CLOSE must have ownership.